|
| LNP-0800G-24-E |
| E-Mark certified 8-Port Industrial PoE+ Unmanaged Ethernet Switches, w/8*10/100/1000Tx (30W/Port), 12~36VDC Power Input |
|
|
Available on request
|
|
|
|
|
|
|
|
|
LNP-0800G-24-E series is an 8-port industrial PoE+ unmanaged switch that supports 8*10/100/1000Tx Ethernet ports. The LNP-0800G-24-E series is a backwards compliant PoE+ switch that will support IEEE802.3af/at standards providing a maximum of 30 watts per port with an input voltage of 12-36VDC. Antaira’s LNP-0800G-24-E series has been specifically designed for rugged and harsh environmental deployments. This product series is housed in a hardened IP30 rated metal enclosure that includes DIN-rail and wall mounting hardware. There are two wide operating temperature models for either a standard temperature range (STD: -10°C to 60°C) or an extended temperature range (EOT: -40°C to 70°C). The LNP-0800G-24-E series also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS (including on-vehicle), solar, security or any other outdoor environment.
- Provides 8x10/100/1000Base-T(X) PoE (P.S.E.) Ports
- Supports P.S.E. Based on IEEE 802.3at Standard up to 30 Watts per Port
- 9.6Kbytes Jumbo Frame Support
- Supports Dual Wide Range 12 ~ 36VDC Power Inputs for Power Redundancy
- Supports Auto-Negotiation and Auto-MDI/MDI-X
- Supports Store-and-Forward Transmission
- Supports Flow Control
- Rigid IP-30 Housing Design
- DIN-Rail and Wall Mounting Enabled
- 5-Year Warranty
| Standards | IEEE 802.3, 802.3U, 802.3ab, 802.3x, 802.3at/af PoE |
| Switching Architecture | Store and forward |
| Mac Address Table | 2048 |
| Jumbo Frame | 9.6Kbytes |
| Ethernet Port | 8*10/100/1000BaseTx (PSE: 30W/Port), Full/Half duplex mode, auto MDI/MDI-X |
| Reverse Polarity Protection | Present |
| Reverse Polarity Protection | NOT Present |
| Overload Current Protection | Present |
| LED | Per Unit: Power 1 & 2 (Green), Fault (Red) |
| Housing | Metal IP30 rated |
| Dimensions | 41.0 x 144.3 x 94.9 mm |
| Mounting | DIN-Rail & Wall-mount |
| Input Voltage | 12~36VDC Redundant Input |
| Power Consumption | 10 Watts (no PD included); 250 Watts (Fully loaded) |
| Operating Temperature | STD: -10° to 60° C EOT: -40° to 70° C |
| Storage Temperature | -40°C ~ 85°C |
| Humidity | 5 to 95%, (non-condensing) |
| EMI | FCC Class A |
| EMS | EN61000-4-2,3,4,5,6,8,11 |
| Certifications | FCC, CE |
| Safety | E-Mark |
- LNP-800AGH-24
- Quick Start Guide
- Wallmount Kit
- Terminal Block
|
|
|
|
|
